background image

 

 

UPDATE INSTRUCTIONS

 

 

 

8 / 16 

Correction signal frequency Starfire 6000 

Update instructions

 

 

Hard hat 

This protects the head against falling parts and injuries. 

 

Hearing protection 

This protects against extreme noise. 

 

Respiratory protection 

This protects the airways against substances or particles. 

1.2.2.  Basic safety regulations for safe operation 

1.2.2.1.  Other remaining dangers and risks 

Despite careful work and compliance with standards and regulations it 
cannot be ruled out that further dangers may arise when working with 
and handling the machine. 

Both the machine as well as all other system components comply with 
the currently valid safety regulations. Nevertheless, remaining risks 
cannot be ruled out completely, even when using the machine for its 
intended purpose and following all information given in the operating 
instructions. 

A remaining risk can also not be excluded beyond the actual danger 
zone of the machine. Persons remaining in this area must pay 
particular attention to the machine so that they can react immediately 
in case of a possible malfunction, an incident or failure, etc. 
All persons remaining in the area of the machine must be informed 
about the dangers that arise from the operation of the machine. 

1.2.2.2.  Regular safety inspections 

Have the machine inspected by an expert/qualified person as required 

for the machine’s operation and use –

 at least once a year at 

minimum. 

 

 

Summary of Contents for Bomag BCM GPS-STARFIRE 6000



















Reviews: