manualshive.com logo in svg

Fayat Group DYNAPAC DFP7AX, Operating Instruction

Share
Download
Fayat Group DYNAPAC DFP7AX Operating Instruction Download Page 57

6.2  Starting the engine

Exhaust fumes contain toxic substances and can damage your

health, cause unconsciousness or even death.

WARNING!
Danger of poisoning by exhaust gases!

–

Do not inhale exhaust gases.

–

Avoid operation in closed or partly closed

rooms, or ensure adequate ventilation when

working in trenches.

Components can be very hot during or immediately after operation.

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Avoid touching hot components.

WARNING!
Loss of hearing caused by too high noise bur-

dens!

–

Wear your personal protective equipment (ear

protection).

Operate the machine only with the guide handle mounted and low-

ered.

Protective equipment:

n

Hearing protection

n

Working clothes

n

Protective gloves

n

Safety shoes

The engine does not start if the oil level is too low.

1.

Fold down the guide handle into working position.

2.

Make sure that no persons are in the danger zone.

Operation – Starting the engine

 

DFP7AX

 

57

Summary of Contents for DYNAPAC DFP7AX



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands