Fayat Group DYNAPAC DFP7AX, Operating Instruction

Page: 53 / 114

5.6 Checking the water level, topping up
NOTICE!
Components may get damaged by frost!
– Drain all water off if there is a risk of frost.
– The water system can alternatively be filled
with an anti-freeze mixture.
ENVIRONMENT!
Anti-freeze mixture is an environmentally haz-
ardous substance!
After the frost period drain off the anti-freeze mix-
ture, collect it and dispose of in an environmentally
friendly way.
Protective equipment: n Working clothes
n Protective gloves
1. Clean the area around the filling port.
2. Remove the cap and check the water supply in the water
tank.
NOTICE!
Dirty or contaminated water can block the bore-
holes!
– Fill only with clean water.
3. If necessary, fill in clean water.
4. Close the cap.
Alternatively, the water tank can also be removed and transported
for filling.
1. Pull out the split pin (1).
2. Pull out the bolt (2) and take off the water tank.
3. Insert the bolt through the guides on the water tank and
insert the split pin to lock.
ð
The water tank can now be carried by the bolt.
Water
B-230-0116
Fig. 30
2
1
B-230-0068
Fig. 31
Checks prior to start up – Checking the water level, topping up
DFP7AX 53