1.2.8.7 Cleaning work
Do not perform cleaning work while the motor is running.
Allow the engine to cool down before starting cleaning work on
engine and exhaust system.
Never use gasoline or other easily inflammable substances for
cleaning.
When cleaning with a high pressure cleaner, do not subject elec-
trical parts and insulation material to the direct jet of water, or cover
them beforehand.
Do not guide the water jet into the exhaust pipe and into the air
filter.
1.2.8.8 After maintenance work
Reassemble all guards and protective devices.
Close all maintenance flaps and maintenance doors again.
1.2.9 Repair
Identify a defective machine with a warning sign.
Only operate the machine after it has been repaired.
Repairs must only be performed by an expert/qualified person.
When replacing safety relevant components, only original spare
parts must be used.
1.2.10 Signage
Keep stickers and signage in good and legible condition and
comply with their meaning.
Replace damaged and illegible stickers or signage immediately.
General – Concerning your safety
BW 174 APO-4i / BW 174 AP-4i / BW 174 ACP-4i AM / BW 174 AP-4i AM
30
