Maintenance every year
BOMAG
47
BT 60 / BT 65
5.15 Oil change in tamper foot
!
Caution
Ensure strict cleanliness.
Change the oil at operating temperature.
For quality and quantity of oil refer to the "table
of fuels and lubricants".
Environment
Catch running out old oil, do not let it seep into
the ground and dispose off environmentally.
l
Tip the tamper backwards.
Fig. 52
l
Clean and unscrew the oil drain plug (Fig. 52),
let the old oil run out and catch it.
l
Install the oil drain plug with Omnifit FD 10
sealant.
Fig. 53
l
Stand the tamper on its foot and secure it
against tipping over.
l
Clean the filler plug (Fig. 53) and unscrew it.
l
Fill in new oil.
l
Screw the filler plug back in with a new seal
ring.
l
Check the oil level in the inspection glass.
l
The oil must be visible in the inspection glass,
if necessary fill in oil accordingly.
541014
OIL
541015
Go
to
Discount-Equipment.com
to
order
your
parts
