Maintenance every month
BOMAG
41
BP 12/40, BP 20/50, BP 25/50
Maintenance every m onth
5.11 Clean the cooling fins and
the cooling air intake open-
ings
!
Caution
Dirty operating conditions, particularly lubri-
cation oil and fuel deposits on the cooling fins
of the engine and the cooling air intake open-
ing have an adverse effect on the cooling of
the engine.
You should therefore immediately seal any oil
or fuel leaks near fuel tank, cylinder or cooling
air intake.
Fig. 34
l
Loosen dried on dirt with a suitable brush (Fig.
34) from all cooling fins and cooling air intake
openings and blow it off with compressed air.
!
Danger
Fire hazard!
Do not use any inflammable solvents.
!
Caution
Do not guide the water jet directly into air filter/
carburettor, starter/air intake and oil warning
light/ignition switch.
l
On a oil contaminated engine use a cold
cleansing agent for cleaning.
l
After a sufficient soaking time clean off with a
water or steam jet and blow out with com-
pressed air.
l
Run the engine warm for a while to avoid cor-
rosion.
!
Caution
Look for the cause of oily contamination and
have any leaks sealed by the customer service
of BOMAG.
Go
to
Discount-Equipment.com
to
order
your
parts
