PAGE OF
3
9
Create stability to the two frames created on page 2 by adding the horizontal timbers pictured below. First, attach horizontal timber 014 to the two
uprights 003 & 004 using the supplied Coach Bolts. (Timber 014 will have a hanging net attachment later on in this instruction so ensure the double
counterbores are positioned in the correct places). Use the below diagram to position post 014 into the correct pre-drilled hole.
014
021
003
001
006
011
012
004
6
7
8
9
3
7
9
SURFACE LEVEL
1
6
8
7
.0
With post 014 positioned in place, start to position and secure 6 x post 021 into place using the supplied Coach Screws. NOTE: Posts 011 & 012 do not
have pre-drilled pilot holes so before securing with a Coach Screw,
create a 8mm pilot hole to prevent the timber from splitting.
Use the dimensions on page 4 to position, mark and pilot hole posts 021 onto posts 011 & 012.
002
