FAVORIT MS 3000 INOX, Instruction Manual

Page: 106 / 109

FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
FAILURE
CODE
FAILURE DEFINITION CONTROL
F5
Water inlet is inadequate.
Make sure that the water inlet faucet is
completely turned on and the water is not
cut off.
Turn off the water inlet faucet and clean the
filter on the connecting terminal of the hose
by removing the water inlet hose from the
faucet.
Switch on your machine again and if the
failure persists,
contact the service.
F3
Continuous water
intake failure
Turn off the faucet.
Contact the service.
F2
The machine can no longer
discharge the waste water.
The water discharging hose
may be clogged.
The filters of your machine may be clogged.
Switch your machine off and on and enable
the programme cancellation command.
If the failure persists,
contact the service
.
F8 Heater failure
Contact the service.
F1
The anti-overflowing
alert is active
Switch off your machine and turn off the
faucet.
Contact the service.
F7
Overheating failure (the
temperature inside the
machine is too high)
Contact the service.
F6 Temperature sensor is faulty
Contact the service.
FE
Electronic card parameter
identification failure
As a result of very sudden and sustained
voltage dips, the electronic card cannot
keep the software variables in the memory.
The programme will resume after being
re-operated. The mains voltage must be
checked.
3 2