Clock functions
Clock functions table
Clock function
Application
TIME OF DAY
To set, change or check the time of day. Refer to "Setting the time".
MINUTE MINDER
Use to set a countdown time (maximum 23 h 59 min). This function has
no effect on the operation of the appliance. You can set the MINUTE
MINDER at any time, also if the appliance is off.
DURATION
To set how long the appliance operates. Use only when an oven function
is set.
END
To set when the appliance must deactivate. Use only when an oven
function is set. You can use Duration and End at the same time (time
delay), if the appliance is to be activate and deactivate automatically lat-
er.
Press
again and again to switch
between the clock functions.
To confirm the settings of the clock
functions, press
or wait 5 seconds for
an automatic confirmation.
Setting the DURATION or END
1. Press
again and again until the display shows
or
.
or
flashes in the display.
2. Press
or
to the set the values and press
to confirm.
For Duration
first you set the minutes and then the
hours, for End
first you set the hours and then the
minutes.
An acoustic signal sounds for 2 minutes after the time
ends.
or
symbol and time setting flash in the
display. The oven stops.
3. Turn the knob for the oven functions to the off
position.
4. Press any button or open the oven door to stop the
acoustic signal.
If you press
when you set the hours
for DURATION
, the appliance goes
to setting of the END
function.
Setting the MINUTE MINDER
1. Press
again and again until and "00" flash in
the display.
2. Press
or
to set the MINUTE MINDER.
First you set the seconds, then the minutes and
then the hours.
At first, the time is calculated in minutes and
seconds. When the time you set is longer than 60
minutes, the symbol
comes on in the display.
The appliance now calculates the time in hours and
minutes.
3. The MINUTE MINDER starts automatically after
five seconds.
After 90% of the set time, an acoustic signal
sounds.
4. When the set time ends, an acoustic signal sounds
for two minutes. "00:00" and flash in the
display. Press any button or open the oven door to
stop the acoustic signal.
If you set the MINUTE MINDER when
the DURATION
or END
function operates, the symbol comes
on in the display.
Count Up Timer
Use the Count Up Timer to monitor how long the oven
operates. It is on immediately when the oven starts to
heat.
To reset the Count Up Timer, press and hold
and
. The timer starts to count up again.
8
