FAURE HERMAN FH8500, User Manual

Page: 32 / 115

F H 8 5 0 0
30
30 30
30 TEC 05.03.09 / 412522
Revision index I
09/07/2013
Remarks:
1) Removing a jumper leads to the disconnection of the corresponding output.
2) On delivery, the pulse outputs are set according to the customer demand.
By default, the pulse outputs are set in the TTL mode.
Connecting scheme for a pulse output
The diagram below shows a typical connection of a pulse output:
P
ins 22 and 23 are connected together and are at the reference
potential of the Modbus output.
Check the correct compatibility of the potentials when several of these outputs are
used simultaneously.
Cabling the pulse outputs
10
+ main output
– main output
22
11 +
π
/ 2 output
–
π
/ 2 output 23
FH 8500
Flow
computer
+
-
External resistor between
480 Ω and 2000 Ω
External power
supply 24V DC
10 (or 11)
22 (or 23)