Faulhaber MC 5010, Technical Manual, Page: 41 / 45

3rd edition, 6-11-2017 7000.05057, 3rd edition, 6-11-2017 7000.05057
Maintenance and diagnostics
41
5 Maintenance and diagnostics
5.1 Maintenance instructions
NOTICE!
The housing of the Motion Controller is not resistant to solvents such as alcohols or ace-
tone.
 During operation and maintenance the housing must be protected against contact with
solvents or substances containing solvents.
5.2 Maintenance activities
The drive is generally maintenance-free. Where the device is mounted in a cabinet, depend-
ing on the deposition of dust the air filter should be regularly checked and cleaned as nec-
essary.
5.3 Diagnostics
Fig. 30: LEDs on the supply side of the standard format
Tab. 32: LED overview
Designation Function
Status LED

Green (continuous): Device active.
 Green (flashing): Device active. However the state machine has not yet reached the
Operation
Enabled
state.
 Red (continuously flashing): The drive has switched to a fault state. The output stage will be
switched off or has already been switched off.

Red (Error code): Boot procedure failed. Please contact FAULHABER Support.
Power LED

Green: Power supply within the permissible range.

Off: Power supply not within the permissible range.
USB • X1 COM • X2 I/O • X3 Up • X4
Power Status
Umot • X5