Faulhaber 2232 BX4 IMC, Technical Manual, Page: 22 / 41

1st edition, 9.04.2024 7000.05073, 1st edition, 9.04.2024 7000.05073
Installation
22
The digital output has the following properties:

Open collector switch to ground

Monitored output current (switch opens in the event of an error)
The digital output can be configured for the following purposes:

Fault output

Actuation of an externally installed brake

Digital output (freely programmable)
4.2.3.3 External circuit diagrams
Bipolar analog set-point specification via potentiometer
Fig. 10: Bipolar analog set-point specification via potentiometer
–
+
20 V
AnIn
AGND
U
P
GND
GND
U
P
10 V
1x10
3
4,7x10
3
1x10
4
Motion Control System
Interface
Ref