Version 5
Operating instructions
SLUGGUARD
®
Page:
10
of:
18
FAUDI Aviation GmbH, Scharnhorststraße 7 B, D-35260 Stadtallendorf
Manual_SLUGGUARD_Rev5
3 General safety and user instructions
3.1
Safety
Intended use
The sensor must be used solely for the level detection of liquids in applications which are
specified and approved by FAUDI Aviation GmbH.
The sensor must only be used for media against which the housing material and sensor tip
are resistant.
Staff qualification
Only use staff who are trained for the activities described. This applies in particular to
assembly, installation and explosion protection. Make sure that the staff have read and
understood these instructions.
Technical condition
Use the sensor only when in perfect technical condition. Only use FAUDI Aviation GmbH
accessories.
FAUDI Aviation GmbH will accept no liability for other manufacturers’ accessories.
Risk of burns from hot media
During operation the sensor housing may warm up to over 50 °C. When working with hot
media provide protection against burns.
Explosion hazard areas
Ensure that safety requirements are complied with. Do not use equipment that would be
exposed to hard impacts.
3.2
Installation for different applications
When using the SLUGGUARD
®
without the dedicated ball valve – use sufficient sealant
material like PTFE (Teflon tape) to seal the sensor.