FAUDE C-Guide, Assembly Instruction Manual, Page: 8 / 13

8
Image7: Upper arm with one side of the holder
Image 8: Upper arm with one side of the holder
3.2 ASSEMBLY ROTATABLE HOLDER
After opening the three
screws (M4x20) the
rotatable holder can be
pulled apart. The ball
bearing, including the hose
holder, remains on one
side of the C-guide holder.
After that, one side of the
holder has to be put on
the robot arm.
When this is done, the second side of
the holder is put on.
Afterwards the
three Hexagon head screws M4x20
(size 3) have to be tightened. Please
ensure that all screws are tightened
evenly.
At the last step of the assembly of the rotatable C-Guide holder, the media
hose will be clipped into the holder.