17
At the bottom of the above figure, there is a Group Mode drop-down menu that
provides Group Mode selection
Note*1
, and its meaning is as follows:
➢
Consecutive Station No.: Consecutive station number. When the Group Size is
specified, its contents will be set to a fixed network address and continuous
station numbers, as shown in the figure below:
➢
Consecutive IP No.: Consecutive network address. When the Group Size is
specified, its contents will be set to consecutive network addresses and a fixed
station number, as shown in the figure below:
Note
*1:
The group mode is applicable to the entire table and cannot be set individually.
When you need to set, you can move the cursor to the table and click the right
mouse button, a pop-up menu will appear as shown below:
Click Add can add new mapping data. Click Del to delete a mapping data. Click Edit to
modify a mapping data. When clicking Add will show the following window.
The following is the explanation of each field:
➢
Local Station:
Represents the remote PLC’s station numbe
r at the local side.
➢
Remote Station:
Represents the actual station number of the corresponding
remote PLC on the network
.
➢
Remote IP:
The IP of the module that the remote PLC belongs to.