manualshive.com logo in svg

FATEK CBES, Manual, Page: 15 / 25

Share
Download
FATEK CBES Manual Download Page 15

                                                                                                                                    15 

 

3.1.3 Operation Mode Setting 

Under the General setting page, in addition to setting IP address and other related 

fields, there is an area to set the operation mode, as shown in the figure below:   

 

Port1 is fixed for FATEK Server, the operation mode can be used for ladder program 

editing, debug, or data access. Port2 is used for supporting Modbus/TCP server or 

FATEK client mode. When selecting Port2, the user needs to setting Port Mapping at 

the Properties setting page. (Please refer to chapter 3.1.4 for description). 

3.1.4 Access Control 

Access Control Setting: Set authorized IP to restrict inappropriate data accessing. Go 

to the Access Control setting page to set up the authorized IP, as shown in the figure 

below: 

 

While setting, you can move the cursor to the table and click the right mouse button, 

then will pop-up a menu as shown below: 

 

Summary of Contents for CBES


























Reviews:

No comments