Functional Description
VIM301
V I M 3 0 1 U s e r M a n u a l
20
© 2 0 1 5 F a s t w e l v . 0 0 2
Figure 3.6:
LVDS1 (XP9) Connector
VCC_LVDS1 panel power voltage is set with the help of XP12 jumper switch. +5 V voltage is
supplied from PC/104 and PCI/104 connectors; +3.3 V voltage
– from PCI/104 connector. To
power a panel req3.3 V, a PC/104-Plus power supply unit is needed providing this voltage
to the PCI/104 connector.
Warning!
The panel power voltage is specified in documentation
accompanying the panel. Incorrect voltage setting can damage the
panel. It is allowed to set the voltage only when the power of both
the panel and the module is switched off.
Table 3.5:
XP12 Jumper Contacts Designation
Pin#
Function
1
+5V
2
VCC_LVDS1
3
+3.3V
Figure 3.7:
XP12 Jumper Switch
Table 3.6:
LVDS1 Power Voltage Selection
XP12 Jumper Position
VCC_LVDS1 Voltage at XP9 Connector
1-2 closed
+5V
2-3 closed
+3.3V
Jumper removed
No voltage supplied to LVDS1
