CPC314
C P C 3 1 4 U s e r M a n u a l
25
© 2 0 2 1 F a s t w e l V e r . 0 0 1
1.10.9 PS/2 keyboard / mouse port
Interface for connection of PS/2-keyboard and mouse is routed to 6-pin XP8 connector (B6B-PH-
KL, JST).
To manufacture the cable, using PHR-6 socket, JST with pins SPH-002T-P0.5S, JST (available for
ordering as a ACS00031-02 set) is recommended. A ready-made adapter for connecting a PS/2
keyboard/mouse with a length of 200 mm is available to order as ACS00043. To connect a mouse,
you should additionally use a standard Y-cable.
Table 1-8
– Purpose of pins of PS/2 (XP8) port
PS/2: B6B-PH-KL (JST)
Pin#
Function
1
KBD_CLK
2
KBD_DAT
3
MS_CLK
4
GND
5
+5V_EXTK
6
MS_DAT
1.10.10 USB1, USB2 ports
The Device Controller has 2 x USB Host ports supporting USB 1.1 and USB 2.0 specifications. The
operating mode of the interfaces is set in the BIOS Setup menu.
Each of the channels has an independent power supply control circuit and power protection (+5 V,
500 mA).
The USB ports are routed to one XP3 connector: IDC2-20, 10-pin, two-row male connector with a
pitch of 2 mm, 98414-G06-10LF (FCI).
A 10-pin socket 89947-710LF (FCI) to a flat ribbon cable with a pitch of 1 mm or a 10-pin socket
10073599-010LF (FCI) with pins 77138-101LF (FCI)
should be used a
s a mating part.
A 200mm USB device adapter is available for ordering as ACS00051-01.
Table 1-9
– Purpose of pins of the USB (XP3) ports
USB1-2: 98414-G06-10LF (FCI)
Pin
#
Function
Pin
#
Function
1
+5 V @ 0.5A
2
+5 V @ 0.5A
3
D-
4
D-
5
D+
6
D+
7
GND
8
GND
9
GND
10
GND
