5
www.fastTT.bike
FastTT P5 3T Aduro Adapter Kit Installation Guide
Insert the REAR bolt from under the base bar FIRST, and
carefully locate it in the thread. Due to the curved
nature of the adapter spacer you need to be extra
careful not to cross-thread the mounting bolts. Screw it
in partially but don’t fully tighten it up yet.
Next, insert the FRONT bolt from under the base bar,
carefully locate it in the thread and tighten lightly. You
will only fully tighten the adapter once the bars and
shifters have been installed (the cable needs to be free
enough at this stage to adjust for bar length).
Once both mounting stacks are fitted, you can install your bars and shifters. Start by bolting on
the mounting brackets supplied with your bars. At this stage you will need to follow the
installation instructions for mounting your FastTT aero bars that are provided in the aero bar
installation guide.
