11
www.fastTT.bike
FastTT Aero Bar Installation Guide – TT Bar
If you are using spacers, you may need to purchase stainless steel or zinc coated cap screws of
an appropriate length and thread diameter (M5 or M6) to suit your setup. Most cap screws are
available from a nut and bolt supplier. We also stock a comprehensive range of long mounting
bolts:
https://www.fasttt.bike/product-category/mounting-bolts/
If you are using the FastTT adjustable angled riser,
or our spacers, they have a channel in the rear to
fit the shifter wires.
Refit the bars to the bike and tighten the bolts to a maximum torque of 6Nm.
A MINIMUM of 3
bolts should be used on each side for safety and strength (4 bolts are recommended).
SECTION C – MOUNTING THE BARS
SECTION C – MOUNTING THE BARS
