FT600(K)SIP Door Phone Administrator Guide
28
Parameter Set-up:
⚫
IP Broadcast Key:
only for FT600K: by forming this code on the keypad the
ip address will be announced through the loadspeaker.
⚫
Select Account:
if you select “Auto” when both account 1 and account 2 are
registered, then the call will be made from account 1, however, if either
account 1 or account 2 is registered, then the call will only be made from
the registered account. You cannot make any calls from the account1/2
that are not registered.
9.3.1.
DND
DND (
Do not disturb
) setting allows you not to be disturbed by any unwanted
incoming SIP calls. You can set up DND related parameters properly on the
device web
Phone
>
Call Feature > DND
interface to block SIP calls you do not
intend to answer. In the meantime, you can also define the code to be sent to
the SIP server when you want to reject the call.
Parameter Set-up:
⚫
Account:
select
“Account1”
, “
Account2”
or “
All account”
for the DND
application.
⚫
DND
: enable or disable the DND function. DND function is disabled by
default.
⚫
Return Code When DND
: select what code should be sent to the calling
device via SIP server.
404 for “Not found”
;
480 for “Temporary unavailable
”
486 for “busy here
”.
⚫
DND On Code:
turn on the DND on server using the Code obtained. The DND
on Code is
78
by default.
⚫
DND Off Code:
turn off the DND on server using the code obtained. The
