Fasttel FT600KSIP Manual Download Page 25

Page: 25 / 81

FT600(K)SIP Door Phone Administrator Guide

www.fasttel.com

FT600(K)SIP

⚫

Status:

check to see if the SIP account is registered or not.

⚫

Account Active:

click

Enable

Disable

to activate or deactivate the

registered SIP account.

⚫

Display Name:

configure the name, for example, the device’s name to be

shown on the device being called to.

⚫

User Name:

enter the user name obtained from SIP account administrator.

⚫

Account:

select the exact account (Account 1&2) to be configured.

⚫

Display Label:

configure the device label to be shown on the device screen.

⚫

Register Name:

enter the SIP account register Name obtained from the SIP

account administrator.

⚫

Password:

enter the password obtained from the SIP account administrator.

9.2.2.

SIP Server Configuration

SIP servers can be set up for devices in order to achieve call sessions through
SIP server between intercom devices. To do this configuration also on web

Account > Basic > SIP Server

interface.

Parameter Set-up:

⚫

Server IP:

enter the primary server IP address number or its URL.

⚫

Server IP:

enter the backup SIP server IP address or its URL.

Summary of Contents for FT600KSIP


















































































Search results

Summary of Contents for FT600KSIP

Reviews:

Related manuals for FT600KSIP

Brands by name

Popular brands

Fasttel FT600KSIP, Manual

Search results

Summary of Contents for FT600KSIP

Reviews:

Related manuals for FT600KSIP

Brands by name

Popular brands