23
2.8 Install with IDR series
RS-232C to RS-485
J-BOX(FRONT)
J-BOX(REAR)
JUNCTION BOX
CONVERTER
IDR SERIES
DOME2 -
DOME2 +
TX-(RS-485)
TX+(RS-485)
DOME1 -
DOME1 +
JUNCTION BOX
WIRE CONNECTION
R(T)X+
R(T)X-
DOME
DATA2
DATA1
RS-232 CABLE
CONVERTER
22 AWG UTP CABLE
Figure 11 – IDR Connection Diagram
If user wants to connect with IDR, please proceed as the following order.
1) Connect RS-232C cable between RS-232C Port of IDR and DVR port of the J-box. ( This
connection enables IDR control remotely from KBD controller)
2) Plug the RS-232C TO RS-485 converter in the RS-232C Port of IDR. Connect wires between
the TX(+/-) of converter and Data2(+/-) of J-Box.
(This connection enables IDR PTZ control from KBD controller)
3) How to setup the controller.
A. SWITCH THE KBD controller ON
B. INPUT PASSWORD (Factory Setting is
9999
)
C. Open the menu of the KBD controller by pressing
Ctrl + Menu
Key.
D. Set as below in Network menu.
4) How to setup IDR
Set Baud Rate
Dome : 9600
Mux : 9600
DVR485 : 9600
DVR232 : 9600
Com Ports
Dome : Dome
Mux : None
DVR485 : AUX IN
DVR232 : IDR
