Fastfame 3SLAV2, User Manual

Page: 33 / 64

33
3SLAV2 User’s Manual
Enabled Activates automatically when the system boots up causing a
warning message to appear when anything attempts to ac-
cess the boot sector or hard disk partition table.
Disabled No warning message will appear when anything attempts to
access the boot sector or hard disk partition table.
CPU Internal Cache/External Cache
These two categories speed up memory access. However, it depends on
CPU/chipset design.
Enabled Enable cache
Disabled Disable cache
CPU L2 Cache ECC Checking
This item allows you to Enable/Disable CPU L2 Cache ECC checking.
The choice: Enabled, Disabled.
Processor Number Feature
The item is used to Enabled/Disabled the Processor Number Feature.
The choice: Enabled, Disabled.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items
during POST.
Enabled Enable quick POST
Disabled Normal POST
First/Second/third/Other Boot Device
The BIOS attepts to load the operating system from the device in the se-
quence selected in these items.
The choice: Floppy, LS/ZIP, HDD, SCSI, CDROM, Disabled.
Swap Floppy Drive
If the system has two floppy drivces, you can swap the logical drive name
assignments.
The choice: Enabled/Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled/Disabled.