FASTERHOLT FM4900H, User Manual

Page: 29 / 88

29
How to start the system:
Disconnect the battery from the electronics.
Insert the SIM card in a regular mobile phone and change the pin code to 1111.
Try sending and receiving an SMS to see whether the SIM and account work as intended.
Note that SIM card MUST support 2G. Some operators do not support 2G.
Install the modem using the supplied threaded rods.
Insert the SIM card in the modem device.
Connect the battery and set machine data #30
= 0 No GSM
= 1 Use GSM, all tele numbers can be used, no speed setting
= 2 Use GSM, only the numbers created in the SMS list can be used.
See chapter for setting up data.
SPEED 11.1m/h
DOSE
22 mm
TIME 14:10 Stop 7:43
M.DATA 30 1
After approx. 30-45 seconds, the modem should be connected to the GSM network.
Signal strength, 0 - 31 and the network is then displayed in menu #6
SIGNAL 23 Signal strength of 10 or above is a stable connection.
NETWORK HOME Signal strength of 99 indicates no signal.
A: +45123456 - Missing antenna
B: +45234567 - Very poor signal