FASTERHOLT FM4900H, User Manual

Page: 16 / 88

16
MENU 3
PRESSURE SENSOR
Shows that the pressure is high when block is lit. The machine can only move when the pressure is high. If no pressure sensor is
fitted (machine data 14 = 0), the machine will operate regardless of pressure status.
The machine can be fitted with analogue pressure sensors. Sensors must be connected according to the diagram. Pressure sensor functions,
except for pressure display, are the same as for digital pressure sensors. There are constants for the pressure sensor type. Similarly, set point
and hysteresis can be selected for each machine.
Shows pressure in [BAR] (00.0) or [PSI] (000). Pressure is high when is lit.
The machine can only move when the pressure is high.
If no pressure sensor is fitted (machine data 14 = 0), the machine will operate regardless of pressure status.
STOP SENSOR
Shows that the magnet is aligned with the stop sensor when block is lit.
The machine can only start when the magnet is aligned with the stop sensor.
The stop sensor has 3 functions:
1. Reset distance.
2. Post-irrigation.
3. Stop pulses to the regulator motor.
SPEED SENSOR
For the speed sensor test, block is only lit when the magnet passes the sensor.
MOT1, MOT2
Displays the current motor current. When the current exceeds 4.5 A, the motor stops.
If the current exceeds 4.5 A and the valve is not in the outer position, there may be a blockage in the valve.