FASTERHOLT FM4400, User Manual And Parts

Page: 14 / 92

14
Short instructions for use
Move machine to a new lane. Display shows start and stop time. Pull hose out to
end of the lane. (e.g. 250 m)
Display now shows stop after 9h 20m. Press the "+" or "-" key to set the speed.
Speed can be adjusted during irrigation.
SPEED has decreased, DOSE has increased and STOP time is later.
Press START to start. Press PRE and POST for pre- and post-irrigation respectively.
STOP time will be later when PRE and POST irrigation are selected.
The turbine will start when the water pressure increases. After a short period,
the regulator finds the correct speed. Irrigation continues until STOP SENSOR is
activated at the end of the lane.
If pre-irrigation is selected, the turbine stops immediately after performing a start
and pre-irrigation. When the pre-irrigation time has elapsed, the turbine starts
and the machine changes status to Irrigating.
If post-irrigation is selected, the turbine stops at the end of the lane when the
stop sensor is activated. Post-irrigation then starts.
Stop sensor is activated, turbine and water are shut off. The machine is now ready
to be moved to a new lane.