Fastech Ezi-Speed ST, Manual, Page: 78 / 111

-78-
8. Convenient functions
8.1 Function list
Functions Description
Referance
contents
Display
Rotation speed
Display the rotation speed of the motor output shaft. 7.4.2
Display by converting thre motor rotation speed into the rotation
speed of the gearhead output shaft.
8.4
Conveyor speed
Dispay by converting the motor rotation speed into the transfer speed
of the conveyor drive.
8.4
Speed increasing Display converting the motor rotation speed into the increasing speed. 8.4
Actual rotation speed Display the actual rotation speed of the motor output shaft. 8.4
Load factor
Display the load torque applied on the motor output shaft as a
percentage (%).
8.4
Alarm
Display the alarm information by the alarm code. 8.4
Display the alarm records. 10.1
Warning
Display the warning information by the warning code. 8.4
Display the warning records. 10.2
Operation data number Display the operation data number that is presently operating. 8.4
I/O signals
Checks whether a signal is input.
7.3.4, 7.5, 8.4
Checks whether a signal is output.
Setting
Rotation speed
Sets the motor rotation speed using the setting button. 7.4.3
Sets the motor rotation speed in the operatation data. 7.5.2
Acceleration time,
Deceleration time
Sets using acceleration/deceleration time parameter. 8.6
Sets the acceleration/deceleration time in the operation data.. 7.5.2
Setting of torque limit
Sets the torque limit.
7.5.2
Sets the torque limiting the operation data.
Limting the setting
range of the rotation
speed
Sets the upper limit and lower limit of the rotation speed. 8.9
Operating using
I/O signals inputs
Operates by inputting signals externally. 7.3.4, 7.5
Disables an operation with the setting button on the front panel. 8.4