TRANSPORTING
TRANSPORTING
Rotary Hoe RH15 / RH18
Page 42
1.
Push SCV I forward to raise toolbar
and fold toolbar in.
2.
While backing up, hold SCV I until
wings are fully folded.
3.
Continue backing up, and push both
SCVI and SCV II until transport
latches fully engage and toolbar
wheels are able to rotate freely.
4.
Disengage SCV I and SCV II.
Transport Notes and Checks
Be sure that the Rotary Hoe is properly
connected to the tractor. Always attach a
safety chain between the Rotary Hoe and the
tractor and install a retainer through the
drawbar pin.
Ensure that the hitch/tongue latch is fully
engaged.
Install cylinder locks (A) on main lift cylinders
before transporting.
NOTE: Add more spacers if needed to
ensure the tool bar is fully raised and
stays fully raised.
Transporting the Machine
Using Warning Lights
CAUTION: When transporting the
machine on a road or highway at night
or during the day, use accessory
lights and devices for adequate
warning to operators of other
vehicles. Check local governmental
regulations.
Various safety lights and devices are
available from Fast Ag Solutions dealer.
Keep safety items in good condition. Replace
missing or damaged items.
During periods of limited visibility, use pilot
vehicles and use extra lights on the machine.
During normal transport, both amber warning
lights will flash in unison at high intensity and
both red lamps will illuminate steadily at low
intensity.
When a turn is signaled, red and amber tail
lamps in the direction of turn will flash at high
intensity and in unison. On the opposite side,
amber and red lamps will illuminate steadily
at high intensity.
Keep Riders Off the Machine
Riders are subject to injury such as being
struck by foreign objects and being thrown off
the machine. Riders obstruct the Operator’s
view resulting in the machine being operated
in an unsafe manner.
. Rid
ts