Fast 8300, Operation Manual

Page: 30 / 42

8300 Liquid Fertilizer Applicator 29 FAST AG Solutions
3.10 Transport
Read and understand ALL information in
Operator’s Manual regarding procedures and
SAFETY when operating applicator in the field
and/or on the road.
Check with local authorities regarding
applicator transport on public roads. Obey all
applicable laws and regulations.
Always travel at a safe speed. Use caution
when making corners or meeting traffic.
NOTICE
Prevent equipment damage.
Verify main tank is empty before
transporting on road.
Make sure SMV (Slow Moving Vehicle)
emblem and all lights and reflectors that are
required by the local highway and transport
authorities are in place, are clean and can be
seen clearly by all overtaking and oncoming
traffic.
Daybreak and dusk are particularly dangerous
and pilot vehicles are recommended.
Be sure applicator is hitched securely to towing
vehicle and a retainer is used through drawbar
pin. Always attach a safety chain between
frame and towing vehicle.
Keep to right and yield right-of-way to allow
faster traffic to pass. Drive on the road
shoulder, if permitted by law.
Do not exceed 20 mph (32 km/h). Reduce
speed on rough roads and surfaces.
Always use hazard warning flashers on tractor
and applicator when transporting unless
prohibited by law.
Stay away from overhead power lines during
transport. Electrocution can occur without direct
contact.
1. Be sure all bystanders are clear of machine.
2. Be sure that applicator is properly connected tow-
ing vehicle. Always attach safety chain between
machine and tractor and install a retainer through
drawbar pin.
3. Stay away from overhead power lines when fold-
ing or extending the wings. Electrocution can
occur without direct contact.
4. Install transport lock spacers on lift cylinders
before transporting.
Note: Add more lock spacers to prevent
the tool bar from dropping during
transport.
5. Depending on machine configuration, wheels may
need to be moved in, inverted or duals removed to
reduce machine transport width to 18 feet or less.
6. Make sure SMV (Slow Moving Vehicle) emblem
and all lights and reflectors that are required by
local highway and transport authorities are in
place, are clean and can be seen clearly by all
overtaking and oncoming traffic.
7. It is not recommended that machine be trans-
ported faster than 20 mph (32 km/ hr).
Road Speed Weight of fully equipped
or loaded machine relative
to weight of towing
machine
Up to 32 km/h (20 mph) 1 to 1, or less
Up to 16 km/h (10 mph) 2 to 1, or less
Do not tow More than 2 to 1