
Fury RSW55
5
cable of the charger from the socket first. To avoid electric
arc discharge, please unplug the AC power cord first.
8. After charging, check the electrolyte level of batteries
again (if using non-standard non-maintenance-free
batteries).
Warning:
Do not place metal tools, shavings, or debris on
batteries as this could cause a spark.
Machine Diagram
1. Warning Beacon
2. Operator Seat
3. Dust Bin (on back)
4. Charging Port (on back)
5. Rear Wheels
6. Main Sweeper Brush & Dust Suppression
Water Tank
7. Steering Wheel
8. Control Panel
9. Power Switch (Key)
10. Battery Compartment (under seat)
11. Dust Board Pedal Raise/Lower (allows
sweeping up of larger debris)
12. Brake Pedal
13. Acceleration Pedal
14. Front Wheel
15. Dust Suppression Spray Nozzles
16. Side Brooms
Checklist Before Running the Sweeper
□ Check the battery power. Charge batteries if power is
below 80%. New batteries take about 10.5 hours to charge.
□ Check the condition of the side brooms and main
sweeper brush. Replace if they are worn out or
damaged. Adjust lower if they do not meet the ground.
(See “Maintenance – Side Brooms” for details).
□ Check for entangling objects wound around or stuck in
the main brush or side brooms. Remove such items.
□ Check that there is water in the dust suppression spray
system. If it is empty or nearly empty, add water through
the port at top left in back.
□ Check that the dust bin is empty. Check for blockages.
□ Check that filtration system has been shaken/cleaned.
Control Panel
1. Steering
2. Battery Power Gauge (behind steering wheel)
3. Forward/Reverse Switch
4. Water Spray Switch (allows nozzles to spray water
around area of side brooms to reduce dust)
5. Backup Warning Beeper
6. Dust Board Raise/Lower Motor Breaker
7. Main Brush Breaker
8. Dust Vibration Switch (activates vibration of dust
filter to shake dust out of filter)
9. Side Broom Switch (activates side brooms)
10. Main Brush and Vac Switch (turns main brush and
vac system on/off)
Starting the Machine
1. Turn the main power key to the ON position.
2. Press the forward/reverse switch.
1
2
3
5
6
7
8
9
11
14
13
1
2
3
4 5 6 7 8
4
12
15
9
10
10
16