Carefully inspect the load rigging and the
condition of ropes or chains.
Make sure that the lifted load is balanced.
The pallet fork must be connected to the crane
hook by means of a chain having at least 3 rings.
Hook up the load, checking that it does not exceed
the capacity indicated on the lifting diagram specific
to each load configuration.
It is absolutely prohibited to walk or stop under a
suspended load and for unauthorized persons to
be within the working area.
Avoid swinging the load above the control
station; in cases where the load is too close, the
crane must be operated from the opposite side.
It is absolutely prohibited to load or unload under or in proximity of electric
lines.
(!) The minimum distance
from electric lines is,
according to CEN norms,
5 meters
, except for
otherwise prescribed by
national norms.
For cranes with top seat
controls, it is necessary to
use a ladder to reach the
control station.
When operating from the
top seat, stay within its
side safety guards.
SAFETY NORMS
F 240
4
c II
}
3
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com