FASSI SPORT 70511BK-3, Owner'S Manual

Page: 6 / 17

6
STEP 2 ATTACH THE SEAT AND SEAT POST

Remove the pre-assembled nylon nuts(46) and flat washer(41) from back of the seat(28). Fix the seat (28) with the top
seat sliding bracket(27) and fasten with nylon nut(46) and flat washer(41).

Remove the pre-assembled M10 knob(24) and flat washer (64) from back of the seat sliding bracket(27). Fix the seat
sliding bracket(27) with the top bracket of seat tube (23) and fasten with M10 knob(24) and flat washer(64).

Attach seat tube (23) and rear cover(21) into the main frame (1) and secure in right position with the seat post quick
release knob (19). Adjust the height of seat by choosing the hole of seat tube.
NOTE:DO NOT pull out the seat tube over the warning line “MAX” which showing on the tube . When you
adjustable the height of seat.

Assemble each pedal (18R&18L)
to the crank . Pedal ”R” assemble with crank right side , Pedal ”L” assemble with crank
left side : See the mark "R" & "L"(right and left) on the pedals (18R&18L) and crank .
NOTE: The right pedal "R" should be threaded on clockwise. The left pedal "L" should be threaded on counter-
clockwise.

Attach the pedal straps to the pedals (18R&18L).
NOTE: Adjust the pedal straps to meet your foot/shoes size by 4 adjustable holes.
NOTE: DO NOT pull out the seat tube over the warning line “MAX” which showing on the tube . When you
adjustable the height of seat.