FASS
Recommended Application
FA D08 095G
Cummins(24 Valve) 1998.5-2004 with stock - moderate horsepower
modifications
FA D08 150G
Cummins (24 Valve) 1998.5-2004 with moderate - extreme horsepower
modifications
Serial #
Note: If the truck has been retrofitted with an in-tank fuel pump, you must use a suction tube kit
or return this kit in its new unused condition for a FA D04 095G.
Due to the increase of fuel flow you may encounter a problem with the stock fuel module.
Adding a FASS suction tube kit will solve that.
¡WARNINGs!
Read all instructions before starting installation of this product!
Installing the improper FASS Pump can cause
severe
engine damage.
Secure vehicle from ROLLING!
Use caution when drilling. Steer clear of any electrical wires , air lines or other damageable
components.
Consult vehicle’s manufacturers’ instructions concerning the electrical system before at-
tempting any electrical connections.
Be sure that the serial # on this installation manual matches that of the outside of the box.
Flush and clean all brass fittings and fuel line from debris.
Keep debris from entering the internals of the system during installation. Getting debris in
the “T” port can lock up the motor. If the motor does lock up from debris call FASS for
technical assistance.
Be sure to utilize the inline fuel filter included in this kit, or the equivalent, to prevent a
motor lock up.
Wear safety glasses when operating power tools such as drills and grinders or when using a
punch or chisel.
Properly secure lines to prevent chaffing.
