8. With the eight holes facing down put the
Wooden leg
on the floor. Slide the
Top End Support
onto the
Wooden Dowel. Slide the
Shelf End Support
onto the two Wooden Dowels. Put the other
Wooden Leg
on top.
Insert a two inch Bolt into the
Top End Support
and the
Shelf End Support
as shown in the diagram. Tighten
with a Flat Head Screwdriver.
If the Bolt will not thread the Cross Nut may need to be realigned.
Repeat this
process with the remaining
Wooden Legs
and
Supports.
9. Slide the
Shelf Center Support
onto the two Wooden Dowels on the
Shelf End Support.
Insert a two inch
Bolt and tighten with a Flat Head Screwdriver. Repeat this process for the other side.
10. Put the
Shelf
in place with the Cam Screws and Wooden Dowels facing down. Tighten the two Cam Locks
with a Phillips Screwdriver by turning clockwise 180 degrees.
