Model
97/98
Please check all table parts for defects before discarding any packing material.
List of Hardware
6- Hinges
36- Flat Head Screws
16- Pan Head Screws
26- Wooden Dowels
4- U Brackets
12- Cam Locks
12- Cam Screws
10- 2” Truss Head Bolts
10- Cross Nuts
6- U-Casters (4 Locking, 2 Non-
Locking)
6- Caster Screws
List of Parts
1- Top
2- Leaves
2- Top End Supports
4- Wooden Legs
2- Metal Legs
1- Shelf
2- Shelf End Supports
1- Shelf Center Support
List of Tools Needed
Phillips Screwdriver
Flat Head Screwdriver
Hammer
Allen Wrench
Begin assembly.
1.Lay the
Top
face down on a carpeted floor or
other soft flat surface. The pre-drilled holes
should all be showing. Place 10 Cam Screws and
4 Wooden Dowels in the holes as indicated. You
may need to tap the Wooden Dowels in with a
Hammer.
2. Put 2 Cam Locks and 3 Wooden dowels into each
Wooden Leg.
When placing Cam Locks, make sure the
small arrow points outward in the direction of the hole.
