![background image](http://html1.mh-extra.com/html/fasep/videotronic-v788-g3/videotronic-v788-g3_user-manual_3526679041.webp)
Fasep 2000 srl
Rev. 1.0
Videotronic V788.G3: User
’s Manual
05 october 2016
B-2
C:
Errors and Malfunctions recognized by the Computer
Errors may apply to some model only.
ERR 1:
Shaft does not rotate
ERR 2:
Rotation Direction is wrong
ERR 3:
Rotation speed is not ready
ERR 4:
Rotation speed is wrong (too low or too high)
ERR 5:
Position Sensor or Position Disk failure
ERR 6:
Safety Safety cover is open
ERR 7:
Measuring cycle was interrupted
ERR 8:
Calibration weight was not inserted.
ERR 9:
Activation code not correct
ERR 10:
Overflow in calculations
ERR 11:
Serial number is wrong
ERR 12:
Serial number not inserted
ERR 13:
Reserved
ERR 14:
Uncorrect password
ERR 15:
E²prom error
ERR 16:
Calibration memory error
ERR 17:
Rod in uncorrect position
ERR 18:
Excessive weight detected
ERR 19:
Reserved
ERR 20:
Reserved
ERR 21:
Error in inputting data
ERR 22:
Brake error
ERR 23:
Substance change due to shakes
ERR 24:
Reserved
ERR 25:
Reserved
ERR 26:
Reserved
ERR 27:
Insufficient pressure
Summary of Contents for VIDEOTRONIC V788.G3
Page 43: ......