Fasep BALATRON 103, User Manual, Page: 9 / 15

Fasep 2000 srl Rev. 1.0
Balatron 103: User’s Manual June,10 2020
5-ii
F
IG
. 17 :
F
IG
. 18 :
F
IG
. 19 :
F
IG
. 20 :
5 MEASUREMENT AND CORRECTION OF UNBALANCE
5.1 Placing the wheel rim on the wheel balancer
5.1.1 Select the cone or flange suitable for the wheel to be balanced. Specific mounting instructions are delivered with each
flange.

NOTE The operation of centering and tightening of the wheel on the flanges is of basic importance for correct
balancing. Good results depend on proper performance of these procedures.
Clean accurately all cones, shaft and adapter surface before placing the wheel on the wheel balancer.
!
CAUTION Always make sure flanges are correctly locked on the motor shaft and wheel is correctly locked on
the flange being used.
5.2 Input of Rim Dimensions
5.2.1 DYNAMIC MODE / STATIC MODE/ ALU
Press MODE to select the operating
mode.
Select the wheel diameter.
Select the distance of the wheel.(Fig. 19,
Fig. 20)
Select the wheel width (Fig. 18).