If the tool does not start:
make sure that in the compressed air circuit there is really pressure;
check that all the valves are opened;
check all the connections of the air supply;
check if the safety valves are actived;
if the problem persists, the tool need to be repaired from qualified personell.
When the tool is not usable and not repairable, dispose it according to regulations of the place in order to safeguard the environment.
This product complies with the dispositions of the following European Directives and Harmonized Standards:
2006/42/EC
Machinery direcive
EN ISO 11148-12:2012
EN ISO 12100:2010
ISO 13732-1:2009
ISO 13732-3:2009
EN ISO 15744:2008
ISO 28927-8:2009
This instrument is warranted to be free from defects in materials and workmanship (for a normal use of service) for a period
of one year.
Any instrument found detective within one year from the delivery date and returned to the factory with transportation
charges prepaid, will be repaired, adjusted, or replaced at no charge to the original purchaser.
If the defect has been caused by a misuse or abnormal operating conditions, the repair will be billed to the customer at a
nominal cost.
ATTENTION
Any excess oil in the motor is immediately expelled from the exhaust port. Always direct exhaust port away
from people or objects.
WARNING
ALWAYS DISCONNECT AIR SUPPLY BEFORE PERFORMING ANY WORK ON THE TOOL.
6. TROUBLESHOOTING
7. DISPOSAL INFORMATIONS
8. EC DECLARATION OF CONFORMITY
F
G
A
3
30
A
IR
S
A
W
9. WARRANTY
