This device has been designed for voltage, resistance, diode and capacitance
measurements as described in this manual.
Always follow the following safety instructions to avoid serious personal
injury and/or damage to the device.
•
NEVER use the multimeter if it is damaged. Always check the appliance before use. Pay
particular attention to the insulation of the connectors. Check the test leads for any
damage to the insulation and make sure there are no exposed metal parts. Check the
continuity of the test leads. Replace damaged tips before use; use only original
components.
•
NEVER use the device if you are in doubt about the correct functioning of the device.
•
Do not use the multimeter for non-specified functions: the protections could be
damaged. If in doubt, contact the manufacturer.
•
Do not use the multimeter in the presence of explosive gases, vapors or dust.
•
Do not operate with voltages higher than the maximum capacity, as indicated on the
instrument; Do not place the multimeter between two pieces of equipment or between
the equipment and ground.
•
Before use, check the voltage of the instrument to be tested.
Before using the tool, carefully read the warnings and instructions
contained in this manual.
This warning and instruction manual is an
integral part of the product and must be kept by the user for any future
consultation. It contains important information on the safe use of the product.
Use destination.
This tester and its accessories must be used only for the
purpose for which they were designed. Any use other than that indicated
could cause damage to people, animals or things and is considered an
improper and unreasonable act. The manufacturer cannot be held
responsible for any damage caused by improper, erroneous or unreasonable
use such as, for example, failure to comply with the instructions and
warnings provided, the use of non-original accessories, modifications, or
unauthorized interventions on the product.
1.
IMPORTANT WARNINGS
2.
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS
