Model ULC Series
06012021ULC,Rev i
Page 12 of 54
2. UNIT OPERATION:
All unit operation is performed using the door mounted touch screen displays.
3. Basic Operation:
After unit setup, plug the power cord(s) into the properly sized receptacles. The door
mounted displays will turn on with the Home screen being displayed. The present interior
chamber temperature will be displayed.
Starting the cooling:
Note: Operator privileges or higher are required to access AUTO button and
change the temperature set point.
a) To start the unit cooling to operating temperature, press the Health icon on the
Home screen (see Health System Screen 1). Press the “AUTO” button, then enter
the access code and press Enter. After a short delay period, the compressors will
start and the unit will begin to cool down to set point. It is not necessary to remain
on this screen while waiting for the compressors to start.
b) To set the chamber temperature, press the Setup icon (see Setup Screen 1). Touch
the Temp Set Point display, then enter the access code and press Enter. Input the
desire temperature set point and press ENT (enter).
Review the Setup, System Health, Unit Information and Technical Service screens to input
your required values and familiarize yourself with the features of the ULC series.
