Faroudja NRS-DVI Installation And Operation Manual Download Page 16

LIMITED WARRANTY

Faroudja Laboratories, Inc. (“Faroudja”) warranties that its products will be free of
defects in workmanship and material and conform substantially to published
specifications under normal use and service. This warranty is made to the first
purchaser of the products and extends for twelve (12) months from the date of sale.
The warranty does not apply to products damaged as a result of accident, misuse,
neglect, alteration, improper installation, unusual physical or electrical stress or
unauthorized repair. Image burn-in on display devices is not covered under
warranty. All warranty claims should be made at the place of purchase. No products
may be returned to Faroudja without it consent. If requested by Faroudja, purchaser
agrees to provide proof of purchase and to return defective products to Faroudja,
transportation charges prepaid. Faroudja’s only liability with respect to products that
do not meet the foregoing warranty, and for which appropriate transportation
arrangements have been made, will be to repair or, at Faroudja’s option, replace
defective products or portions thereof.

Warranty may be void if unit is returned to Faroudja Service not shipped in the
original shipping carton. 

THE FOREGOING WARRANTY IS IN LIEU OF ALL WARRANTIES EXPRESSED,
IMPLIED OR STATUTORY, REGARDING THE PRODUCTS, AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ANY
OTHER WARRANTY OBLIGATIONS ON THE PART OF FAROUDJA.

IN NO EVENT WILL FAROUDJA BE LIABLE FOR LOSS OF PROFITS OR
GOODWILL, OR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR 
SPECIAL DAMAGES OF ANY KIND, HOWEVER CAUSED, WHETHER BY
FAROUDJA’S BREACH OF WARRANTY OR BY FAROUDJA’S SOLE OR
CONCURRENT NEGLIGENCE OR OTHERWISE.

FAROUDJA may change product specifications and warranty policy at any time
without notice.

Faroudja Laboratories

750 Palomar Ave., Sunnyvale, California 94085

Tel: 408-735-1492  Fax: 408-735-8571

www.faroudja.com

A division of Genesis Mirochip, Corp.

Summary of Contents for NRS-DVI

















Reviews: