
18
ZIV
A
3.1
OVERALL DIMENSIONS
3. DEVICE INSTALLATION
Fig. 2
Warning of potential electrical, light and head hazard:
The device must be installed by specialist technicians.
The power supply must always be disconnected during installation operations.
For the connection, use a terminal board in accordance with EN
60998-2-1 or EN60998-2-2 E.g: Cembre Z205-1 Zetamini series
Check the plate data before installation.
Notes for installation
The operation or safety of the light does not depend on the polarity or the power
supply. For which, inverting the power supply cables does not pose a risk of
malfunctioning.
Notes for installation
Support/lift the light using the external profile. Do not force the diffuser panel
(white).
935
603
48