16
ZIV
A
1.3
GENERAL RULES AND MAIN WARNINGS
• The light’s packaging is suitable to adequately protect against external agents from
entering.
The ceiling must be able to support 40 kg at each fixing point.
Warning against electrical or fire hazard
Do not use the light if any of this components are damageed.
The device must only be installed by qualified personnel.
The appliance must be installed with an omnipolar type xut-off device in complian-
ce with the IEC 61058-1 Standard, provided with a grounding cable.
Check that the supply voltage indicated on the data plate corresponds to the mains
voltage.
Do not carry out any maintenance operations on the light when the power is on:
disconnect the power cable from the mains before operating.
Caution, risk of electric shock (source: IEC 60417-6042 (2011-11)
The light source contained in this luminaire shall only be replaced by the manufacturer
or his service or a similar qualified person
Warning of the hazard of falling of suspended masses
Strictly observe the maximum sexpected loads.
Photobiological risk warning
The light is classified as a photobiological risk according to EN 62471.
However, it cannot be excluded that patients who are particularly photosensitive or
who have taken photosensitising medicinal products may have erythema or allergic
reactions to the light. In this case, suspend the treatment and use very low levels of
lighting.
Warning of risk of explosion
The device is not suitable for installtion in flammable or oxygen-rich environments.
Warning of the hazard arising from incorrect maintenance
Do not carry out any maintenance or replace parts otherthan those indicated in the
manual. Any operation not indicated therein may compromise the device’s safety.
Only perform maintenance operations listed in the manual; in any other case, con-
tact technical support.
Warning of the hazard of damaging
To avoid the risk of damaging to the product, do not push and/or force the light
panel.
Disposal notice
The product is covered by WEEE Directive 2012/19/UE
For the scrapping and disposal of materials, follow the regulations in force in your
country, possibly using recognized and authorized specialist companies.
At the end of the useful life, separate the materials according to their type (ferrous,
rubber, plastic). Do not leave small parts of the appliance unattended or within the
reach of exposed persons (children) because they are tpotential sources of danger.
The company FARO does not allow any modification to the product that is not expressly
authorised in writing,
under penalty of forfeiture of compliance with the safety and warranty
regulations.