INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA
SICHERHEITSHINWEISE / VEILIGHEIDSINSTURCTIES INSTRUZIONI DI SICUREZZA
Faro
18
HUGGER STYLE
Fasten the canopy to the top of the fan motor housing with 3
screws provided. Hanger the canopy from the tab on the
hanger bracket. This will allow you to make the electrical
connections without having to hold the fan up. Make the wire
connections. Put 2 screws in the hanger bracket, leaving
them partially out. Place the canopy up on the hanger
bracket by inserting the slotted opening of the canopy on the
screws. Insert the remaining screws through the remaining
canopy holes and
tighten all 4 screws
BLADE ATTACHMENT
Attach the fan blades to the blade arm. The 3 small
screw should be used to attach each blade to the
blade arm with trim. Remove the 6 screws from the
underside of the fan motor and switch housing
assembly and use these to attach the blade arm and
blade to the motor housing. Tighten the screws
securely.
ELECTRICAL CONNECTIONS
