Farnear Electronics FN01-4GWB, Manual

Page: 13 / 19

Farnear Electronics Co., Ltd
FN01 User Guide
10
F
Location
:123456F :123456F
GPRS:#IMEI,CMD-F,A,DATE,TIME,L
AT,LON,Speed,Batter-Signal,HDOP#
SMS:CMD-F,A,Google link
CMD-F,A,http://maps.google.com/ma
ps?f=q&hl=en&q=22.7198011,114.38
78008&ie=UTF8&z=16&iwloc=addr&o
m=1Speed:000.1
G
Ask for
Parameter
:123456G :123456G
#IMEI,CMD-G,A1:-:30,A2:-:20,A3:-:20
,A4:-:20,A5:-:20,A6:-:20,A7:-:20,A8:-:
20,IP;Port,Password,APN:,name,pass
word,Report time-unit,Ask for
GPS-unit,Reconnect time-unit,time
zone,speed value,low battery
value,Heart beat-its unit#
#867688033841044,CMD-G,A1:-1382
3561161:30,A2:-:20,A3:-:20,A4:-:20,A
5:-:20,A6:-:20,A7:-:20,A8:-:20,IP:0.0.0
.0:0,123.249.83.8:10385,123456,APN
:,,,5-M,10-M,10-M,+08:00,80,30,3-M#
H
Change
Password
:Old PSWH,New PSW :123456H,000000
#IMEI,CMD-H,New PSW# #867688033841044,CMD-H,000000#
I
Rectangle
Geo-fence
:123456Ix,y,z,aa.aaaaaaaN/S,bbb.bb
bbbbbE/W,cc.cccccccN/S,ddd.ddddd
ddE/W
x is fence number (Maximum is 5)
y is switch, y=1 on, y=0 off
z is alarm mode, 1 go in alarm, 2 go out
alarm, 3 go out and in alarm
aa.aaaaaaaN(S), bb.bbbbbbbE(W) is the
1st coordinate
cc.cccccccN/S,ddd.dddddddE/W is the 2nd
coordinate
:123456I1,1,1,22.7198011N,114.3878
008E,22.7198012N,114.3878009E
#IMEI,CMD-I,OK# #867688033841044,CMD-I,OK#
#IMEI,ALM-Bx-y,A,DATE,TIME,LAT,L
ON,Speed,Battery-Signal,HDOP#
x=3 is Go in, x=4 is Go out
y is the number of the Geo-fence
#867688033841044,ALM-B4-1,A,DAT
E:190624,TIME:150324,LAT:22.7195
393N,LON:114.3878296E,Speed:001.
2,097-19,06.52#
J
Set Over
Speed
:123456Jz,xxx (Unit is km)
z is swtich, z=0 close, z=1 open
xxx is speed value
:123456J1,003
#IMEI,CMD-Jz,xxx# #867688033841044,CMD-J1,003#
#IMEI,ALM-C,A,DATE,TIME,LAT,LO
N,Speed,Battery-GSM Signal,HDOP#
#867688033841044,ALM-C,A,DATE:
190624,TIME:142652,LAT:22.719549
1N,LON:114.3876458E,Speed:006.0,
100-13,18.30#