FarmTek MD-300, User Manual

Page: 4 / 13

MD-300 User’s Manual Page 3 MD-300 User’s Manual Page 3 (Cont’d)
MD-300 SETUP OPTIONS
Display Description
Electric Eye Alignment Status
Good / Bad Alignment status of the electric eye plugged into
the RECEIVER jack.
Good A / Bad A
Alignment status of electric eye plugged into the
AUX jack. Displayed only for events which use the
second electric eye.
Good H / Bad H Alignment status of electric eye plugged into the
HORN jack. Displayed only for events which use
the third electric eye.
Event Types
Barrel
Press SELECT OPTION to select the Barrel Rac-
ing event.
Rope 1 Press SELECT OPTION to select Roping using
one electric eye (eye for calf or steer, RP-210 Au-
tomatic Rope Barrier used on rider's box).
Rope 2 Press SELECT OPTION to select Roping using
two electric eyes (eye for calf or steer and RP-250
Electric Eye Barrier across rider's box).
Rope 3
Press SELECT OPTION to select Roping using
three electric eyes (eye for calf or steer and RP-
250 Electric Eye Barrier across header's box and
heeler's box).
Pen Press SELECT OPTION to select the Team Pen-
ning event.
Cut Press SELECT OPTION to select the Cutting
event.
Bull Press SELECT OPTION to select Bull or Bronc
riding events.
Eqst 1 Press SELECT OPTION to select the Show
Jumping (equestrian) event using one pair of elec-
tric eyes (entry and exit through the same pair of
eyes).
Eqst 2 Press SELECT OPTION to select the Show
Jumping (equestrian) event using two pairs of
electric eyes (entry and exit through separate
pairs of electric eyes).
MD-300 SETUP OPTIONS (cont'd)
Display Description
Dash Press SELECT OPTION to select dash or sprint
events which measure time between a start line
pair of eyes and a finish line pair of eyes.
Time Formats, Counting Direction
999.999 Press SELECT OPTION to count in seconds to
.001
9999.99 Press SELECT OPTION to count in seconds to
.01
9.59.999 Press SELECT OPTION to count in minutes and
seconds to .001
99:59.99
Press SELECT OPTION to count in minutes and
seconds to .01
99:59:59 Press SELECT OPTION to count in hours, min-
utes and seconds.
Cnt Up Press SELECT OPTION to force the timer to
count up.
Cnt Dn Press SELECT OPTION to force the timer to
count down.
Miscellaneous Setup Options
Horn Press SELECT OPTION to change the time the
horn should sound.
Horn 2 Press SELECT OPTION to change the time that a
warning horn (prior to the final horn) should sound.
SB Brt Press SELECT OPTION to select the next score-
board brightness level. Not supported by all score-
boards.
Set.Def Press SELECT OPTION to set default values. The
horn time, warning horn time (Horn 2), time format
and counting direction are saved as the new val-
ues to use whenever the current event type is se-
lected in the future
Factory Factory use only.