2
113593
Revision date: 09.21.18
TOOLS
The following list identifies tools needed to
assemble the aeroponic system. Additional tools
may be needed depending on application.
• Tape measure and gloves.
• Marker
• Variable speed drill (cordless with extra
batteries works best).
• Wrenches and socket/ratchet set for stand
assembly. Sizes: 7/16", 1/2", and 3/8".
• 1-3/8" or 1-1/2" hole saw bit
• 2-1/4" hole saw bit
• 5/16" drill bit
• Tool to cut pvc tubing
• Ladders to work at the height of system.
READ THIS DOCUMENT BEFORE YOU BEGIN TO ASSEMBLE YOUR HYDROCYCLE VERTICAL AEROPONIC SYSTEM.
This guide provides helpful hints and important information needed to safely assemble and properly maintain the HydroCycle Vertical Aeroponic System. Read
and understand this guide before you begin.
Important Information
SAMPLE ASSEMBLY PROCEDURE
The steps outlining sample table system assembly
process are as follows:
1. Verify all parts are included in shipment. Notify
customer service for questions or concerns.
2. Read these instructions and all additional
documentation included with shipment
before
you
begin.
3. Gather tools and assistants needed to assemble
product.
BASIC CARE AND MAINTENANCE
Proper care and maintenance of your
system is important. Check the following
items periodically to properly maintain your
aeroponic system.
• Check connections to verify they remain
tight.
• Verify pump is working properly.
• Check and clean filter to optimize
performance.
• Clean reservoir periodically to prevent
unwanted contamination of solution.
• Monitor temperatures (room and solution)
to maximize plant growth.
SAFETY PRECAUTIONS
• Apply pvc primer and cement in a well-ventilated
area.
Follow all instructions on containers.
• Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with electric power tools
and cords. Use battery-powered tools if possible.
• Exercise caution when using all tools.
• Wear gloves and eye protection when drilling and
cutting.
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts
before
you begin assembly.
1. Unpack contents of shipment and place where
you can easily inventory parts. Refer to Bill of
Materials/Spec Sheets.
2. Verify all parts listed on Bill of Materials/Spec
Sheets are present. If anything is missing or you
have questions, contact Customer Service.
WARNING:
KEEP ALL ELECTRICAL
CORDS AND CONNECTIONS OUT OF THE
RESERVOIR. CONSULT THE SERVICES
OF A QUALIFIED ELECTRICIAN TO
ADEQUATELY AND SAFELY CONNECT
PUMP TO A POWER SUPPLY.
ALL ELECTRICAL CIRCUITS SHALL BE
DESIGNED IN ACCORDANCE WITH LOCAL
AND REGIONAL BUILDING CODES AND
STANDARDS.
