21
GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
Revision date: 06.06.18 113836_37_38_39
END PANEL INSTALLATION (continued)
Mark UV Side
X
NOTE:
When attaching any aluminum profile,
remember to account for areas where different sections
of profile intersect so that profile is cut to proper length.
Space FA4484B Tek screws evenly at 16" on-center
when securing panels. DO NOT USE WASHERS
WHEN SECURING H-CHANNEL TO END FRAME.
DO NOT install profile on bottom of end wall panels.
These edges are sealed with vent tape.
Always remove protective film. Mark and install the UV-
protected side to the outside (toward the sun).
Use an FA4484B Tek screw and washer to secure panel to
end wall frame. Do not crush panel when installing screws.
Diagram shows basic panel installation and fasteners used
to secure polycarbonte panels.
GLAZING PANEL
8MM POLYCARBONATE
PANEL SPLICE "H" CHANNEL
TEK SCREW
END WALL FRAME TUBE
END WALL FRAME TUBE
TEK SCREW & NEO-BONDED WASHER
Secure all polycarbonat panels as shown in the photos.
