88
Revision date: 02.17.23
2
Assembly Instructions
12. With assistance, carefully lift the expanded
metal top and carry it to the assembled frame.
CAUTION: Metal is sharp! Wear gloves to
protect hands.
14. Measure diagonally and adjust frame as
needed until dimensions are similar. Expanded
metal top will sit tight to the tops of frame rails.
13. Lower expanded metal top into frame. Gently
tap frame rails as needed to allow top to drop
into position. Do not force the top into place or
pound on the expaned metal.
15. Measure to find the center of each end rail and
mark location.
NOTE:
Use a block of wood or small hammer
if needed to lightly tap frame rails apart to
allow the top to drop into place.
16. Take an FA4482B Tek screw and 102921B
neo-bonded washer and secure expanded
metal top to end rail. Fastener should be snug.
Do not strip threads.
FA4482B
Tek Screw
102921B
Neo-Bonded
Washer
LOWER TIER BENCH ASSEMBLY (CONTINUED)
